A. Loewe, and O. Dössel. Commentary: Virtual In-Silico Modeling Guided Catheter Ablation Predicts Effective Linear Ablation Lesion Set for Longstanding Persistent Atrial Fibrillation: Multicenter Prospective Randomized Study. In Frontiers in Physiology, vol. 8, pp. 1113, 2017
O. Dössel, and A. Loewe. Computerized modeling of the human heart. In Zeitschrift für Medizinische Physik, vol. 27(3) , pp. 167-169, 2017
G. Lenis, N. Pilia, A. Loewe, W. H. W. Schulze, and O. Dössel. Comparison of Baseline Wander Removal Techniques considering the Preservation of ST Changes in the Ischemic ECG: A Simulation Study. In Computational and Mathematical Methods in Medicine, vol. 2017(Article ID 9295029) , pp. 13, 2017
The most important ECG marker for the diagnosis of ischemia or infarction is a change in the ST segment. Baseline wander is a typical artifact that corrupts the recorded ECG and can hinder the correct diagnosis of such diseases. For the purpose of finding the best suited filter for the removal of baseline wander, the ground truth about the ST change prior to the corrupting artifact and the subsequent filtering process is needed. In order to create the desired reference, we used a large simulation study that allowed us to represent the ischemic heart at a multiscale level from the cardiac myocyte to the surface ECG. We also created a realistic model of baseline wander to evaluate five filtering techniques commonly used in literature. In the simulation study, we included a total of 5.5 million signals coming from 765 electrophysiological setups. We found that the best performing method was the wavelet-based baseline cancellation. However, for medical applications, the Butterworth high-pass filter is the better choice because it is computationally cheap and almost as accurate. Even though all methods modify the ST segment up to some extent, they were all proved to be better than leaving baseline wander unfiltered.
Radiofrequency ablation has become a first-line approach for curative therapy of many cardiac arrhythmias. Various existing catheter designs provide high spatial resolution to identify the best spot for performing ablation and to assess lesion formation. However, creation of transmural and nonconducting ablation lesions requires usage of catheters with larger electrodes and improved thermal conductivity, leading to reduced spatial sensitivity. As trade-off, an ablation catheter with integrated mini electrodes was introduced. The additional diagnostic benefit of this catheter is still not clear. In order to solve this issue, we implemented a computational setup with different ablation scenarios. Our in silico results show that peak-to-peak amplitudes of unipolar electrograms from mini electrodes are more suitable to differentiate ablated and nonablated tissue compared to electrograms from the distal ablation electrode. However, in orthogonal mapping position, no significant difference was observed between distal electrode and mini electrodes electrograms in the ablation scenarios. In conclusion, catheters with mini electrodes bring about additional benefit to distinguish ablated tissue from nonablated tissue in parallel position with high spatial resolution. It is feasible to detect conduction gaps in linear lesions with this catheter by evaluating electrogram data from mini electrodes.
Atrial arrhythmias such as atrial flutter and atrial fibrillation are a burden for patients and a major challenge for modern healthcare systems. Identification of patients at risk to develop atrial arrhythmias at an early stage carries the potential to reduce the incidence by implementing appropriate strategies to mitigate the risks. Diagnostic methods based on the ECG are ideal risk markers due to their noninvasiveness and omnipresence. The left atrium (LA) plays a major role in the intiation and perpetuation of atrial reentry arrhythmias. However, the LA is not well represented in the P-wave derived through standard ECG leads. Here, we optimize ECG lead positions to maximize LA information content. Towards this end, we used a cohort of eight personalized computational models providing the unique opportunity to separate LA and right atrial (RA) contributions to the P-wave, which is not feasible in vivo. The location of maximum P-wave signal energy was located on the center of the chest for all subjects with marked overlap between regions of maximum LA and RA P-wave amplitude. The regions of highest ratio between LA and RA signal energy differed between patients. However, a region with LA signal energy being higher than that of the RA and providing a sufficiently large absolute P-wave amplitude was identified at the center of the back consistently across five models of the cohort. Optimized linear combinations of standard 12-lead signals yielded comparably good results. Our newly proposed electrode positions on the back as well as selected linear combinations of standard 12-lead signals improve the LA information content considerably. By using these, more relevant diagnostic information regarding the anatomical and electrophysiological properties of the LA can be derived in future.
A. Loewe, Y. Lutz, A. Fabbri, S. Severi, G. Seemann, and D. Dössel. Influence of Electrolyte Concentration Changes on Sinus Node Function - A new Player Regarding Sudden Cardiac Death in Patients with Chronic Kidney Disease?. In Gordon Research Conference on Cardiac Arrhythmia Mechanisms, 2017
Atrial fibrillation and atrial flutter are the most common atrial arrhythmias placing a heavy burden on patients and posing a challenge on healthcare systems. If patients at risk to develop atrial arrhythmias can be identified at an early stage, the arrhythmia incidence can be lowered by implementing appropriate strategies to mitigate the risks. Diagnostic methods based on the ECG are ideal risk markers due to their noninvasiveness and omnipresence. The left atrium (LA) plays a major role in the initiation and perpetuation of atrial reentry arrhythmias. However, the LA is not well represented in the P-wave derived through standard ECG leads. Here, we optimize ECG leads to maximize LA information content. Towards this end, we used a cohort of eight personalized computational models providing the unique opportunity to separate LA and right atrial (RA) contributions to the P-wave, which is not feasible in vivo. The location of maximum P-wave signal energy was located on the center of the chest for all subjects with marked overlap between regions of maximum LA and RA P-wave amplitude. The regions of highest ratio between LA and RA signal energy differed between patients. However, a region with LA signal energy being higher than that of the RA and providing a sufficiently large absolute P-wave signal energy was identified at the lower left quadrant of the back consistently across most subjects of the cohort. Optimized linear combinations of standard 12-lead signals (considering the eight independent leads) yielded comparably good results amplifying LA information by more than one order of magnitude. Our newly proposed electrode positions on the back as well as selected combinations of standard ECG signals improve the LA information content considerably. By using these, more relevant diagnostic information regarding anatomical and electrophysiological properties of the LA can be derived in future.
Atrial arrhythmias like atrial fibrillation and atrial flutter are a major health challenge in developed countries. Radiofrequency ablation performed via intracardiac catheters is a curative therapy for these reentrant arrhythmias. However, the optimal location of ablation lesions is not straightforward to determine, particularly for complex activation patterns. Thus, a clinical need for tools to intuitively visualize complex activation patterns and to provide a platform to evaluate different ablation strategies in dry runs is apparent. Here, we present a virtual reality system that allows to interactively simulate atrial excitation propagation and place ablation lesions. Our software builds on the IMHOTEP framework for the Unity3D engine and implements a multithreaded model-view-controller design pattern. Excitation propagation is computed using a fast marching approach considering refractoriness. Interactive rewind and playback is supported through a combination of the flyweight pattern for simulation data with complete snapshots for key frames. The system was evaluated in a user study using the HTC ViveTM headset including two controllers. For high fidelity virtual reality interaction, a minimum frame rate of 60 per second is required. In a biatrial anatomical model comprising 36,059 nodes (Figure 1), even complex activation patterns with multiple wavefronts could be simulated and rendered down to 2x slow motion (1 sec activation sequence displayed during 2 sec wall time) on a desktop machine. Results of the user study suggest added value regarding the comprehension of arrhythmias and ablation options and very good intuitiveness of the user interface requiring almost no teach-in. The virtual reality tool is ready to be used for educational purposes and prepared to import personalized models supporting diagnosis and therapy planning for atrial arrhythmias in the future.
Atrial fibrillation (AF) ablation guided by basket catheter mapping has shown to be beneficial. Yet, the initial excitement is mitigated by a growing skepticism due to the difficulty in verifying the protocol in multicenter studies. Overall, the underlying assumptions of rotor ablation require further verification. The aim of this study was therefore to test such hypotheses by using computational modeling. The 3D left atrial geometry of an AF patient was segmented from a pre-operative MR scan. Atrial activation was simulated on the 3D anatomy using the monodomain approach and a variant of the Courtemanche action potential model. Ablated tissue was assigned zero conductivity. Reentry was successfully initialized by applying a single suitably delayed extra stimulus. Unipolar electrograms were computed at the simulated electrode positions. The final dataset was generated by varying location of reentry and catheter position within the LA. The effect of inter-electrode distance and distance to the atrial wall was studied in relation to the ability to recover rotor trajectory, as computed by a novel algorithm described here. The effect of rotor ablation was also assessed.
L. Baron, A. Loewe, and O. Dössel. From clinics to the virtual beating heart a general modeling workflow for patient-specific electromechanical heart simulations. In BMTMedPhys 2017, vol. 62(S1) , pp. S70, 2017
Generating meshes of complex structures in the human body like the heart organ is a prerequisite for computational simulations of of organ function. The quality of the conclusions derived from these simulations greatly depends on the quality and accuracy of the mesh they are based on. Volumetric computation domain can be represented by an equally-spaced voxel grid, or – in case of more sophisticated partial differential equation discretization methods (finite elements, finite volumes) – first, second or even higher order tetrahedral meshes. Here, we present a workflow that is capable of creating high quality meshes for such simulations. The workflow contains segmentation, surface mesh generation, volume mesh generation, and patient-specific parameter fitting to produce the desired results. While segmentation itself is a more or less unique mapping from a grayscale DICOM data set to a labeled, three-dimensional voxel mesh, different approaches exist for their transformation to a surface mesh. Our process involves a two-level approach for obtaining triangular or mixed rectangular surface meshes of desired quality and resolution. Both are crucial for the next step: obtaining a volumetric tetrahedral grid with the desired degrees of freedom. In the last step, a derivative-free parameter estimation approach is used to calibrate the dynamic behavior and tailor the model patient-specifically. All software used in the workflow is published under open source licenses and freely available. Its capability is demonstrated by means of an elastomechanical simulation of a human heart and yields measurable validation quantities in physiological ranges. We want to stress that the presented approach is generic and can easily be used for the model generation of other organs like liver, lungs or the aortic arch as well. The resulting meshes can be used for various types of simulations (electrical excitation propagation, blood flow) and use cases (clinical diagnostics, therapy planning etc.).
Today, patients suffering from atrial arrhythmias like atrial flutter (AFlut) or atrial fibrillation (AFib) are examined in the EP-lab (electrophysiology lab) in order to understand and treat the disease. Multichannel catheters are advanced into the atria in order to measureelectric signals at manyintracardiacpositions simultaneously. Complementary to clinical learning,comprehension of the disease and therapeutic strategies can be improved with computer modeling of the heart. This way, hypotheses about initiation and perpetuation of the arrhythmia can be tested and ablation strategies can be assessed in-silico. Modeling and biosignal analysis can benefit from mutual fertilization. On the one hand, modeling can be improved and personalization can be achieved via high density mapping of the atria. On the other hand, new algorithms for the interpretation of multichannel electrograms can be developed and evaluated with synthetic signals from computer models of the atria. This article illustrates the synergetic potential by examples and highlights challenges to be addressed in the future.
O. Dössel, and A. Loewe. V 10 Computer Modelling pharmakologischer Effekte. In Frühjahrstagung der Deutschen Gesellschaft für Kardiologie, 2017
A. Fabbri, A. Loewe, R. Wilders, and S. Severi. Propagation of the primary pacemaker activity in the human heart: a computational approach. In European Medical and Biological Engineering Conference (EMBEC), vol. 65, pp. 201, 2017
The sinoatrial node (SAN) is the natural pacemaker of our heart. How this small tissue is able to drive a remarkably larger number of intrinsically quiescent atrial cells is still debated; a computational investigation of the underlying mechanisms can help to better understand the SAN’s ability to pace-and-drive the surrounding atrium. Aim of this work is to elucidate how the human SAN action potential can successfully be captured by and propagate into the surrounding atrial tissue. The Fabbri et al. and the Courtemanche et al. models were used to describe the human SAN and atrial cells, respectively. The behaviour of two coupled regions was investigated varying the interregional conductivity (σ) and relative size. Simulations showed that it requires at least an isopotential SAN region 2.85 times wider than the atrial one. A 1D strand of homogeneously coupled SAN and atrial elements was used to identify an interval for σ showing pace-and-drive behaviour (100 SAN vs 100 atrial elements) and to investigate the source-sink interplay (10, 50 or 100 SAN elements vs 100 atrial elements). The 1D strand showed pace-and-drive behaviour for 𝜎 = 0.08 − 36 S/m; a stronger source, with a higher number of SAN elements, led to a wider 𝜎 range that allowed pace-and-drive behaviour, whereas a stronger sink did not affect the behaviour of the tissue. This preliminary work shows the ability of a small human SAN region to pace-and-drive the surrounding atrial tissue. Further investigations are needed to explore different conductivity configurations, including spatial gradients.
The Purkinje system is part of the fast-conducting ventricular excitation system. The anatomy of the Purkinje system varies from person to person and imposes a unique excitation pattern on the ventricular myocardium, which defines the morphology of the QRS complex of the ECG to a large degree. While it cannot be imaged in-vivo, it plays an important role for personalizing computer simulations of cardiac electrophysiology. Here, we present a new method to automatically model and customize the Purkinje system based on the measured electrocardiogram (ECG) of a patient. A graphbased algorithm was developed to generate Purkinje systems based on the parameters fibre density, minimal distance from the atrium, conduction velocity, and position and timing of excitation sources mimicking the bundle branches. Based on the resulting stimulation profile, the activation times of the ventricles were calculated using the fast marching approach. Predescribed action potentials and a finite element lead field matrix were employed to obtain surface ECG signals. The root mean square error (RMSE) between the simulated and measured QRS complexes of the ECGs was used as cost function to perform optimization of the Purkinje parameters. One complete evaluation from Purkinje tree generation to the simulated ECG could be computed in about 10 seconds on a standard desktop computer. The measured ECG of the patient used to build the anatomical model was matched via parallel simplex optimization with a remaining RMSE of 4.05 mV in about 16 hours. The approach presented here allows to tailor the structure of the Purkinje system through the measured ECG in a patient-specific way. The computationally efficient implementation facilitates global optimization.
Chronic kidney disease (CKD) affects more than 30 million patients in the European Union. CKD causes alterations in the extracellular plasma electrolyte concentrations, which affect cardiac electrophysiology. A total of 25% of all deaths of CKD patients are due to sudden cardiac death (SCD). Until recently, ventricular fibrillation was assumed to be the main reason. In a 2015 study, Wong et al. observed bradycardia and asystole as the predominant mechanisms of SCD in patients with CKD. This shows that the influence of electrolyte changes on the underlying mechanisms of pacemaking in the sinoatrial node (SAN) needs to be better understood. In this work, we have updated the computational model of the human SAN given by Fabbri et al. and investigated the CKD-induced change of [Ca2+]o (0.6-3mM), [K+]o (3-9mM) and [Na+]o (120-150mM) on pacemaking. [Ca2+]o had the most dominant effects on SAN function. Low [Ca2+]o caused severe bradycardia in the model (down to 17 bpm) for 0.6 mM. A critical concentration range of calcium in the subspace [Ca2+]sub was identified as the possible underlying mechanism for pacemaking. For increasing [Ca2+]o, the heart rate (HR) increased, resulting in 142 bpm for the highest calcium concentration. The effect of [K+]o variation was similar to the one for [Ca2+]o, but caused less pronounced change. The resultant changes due to variation of [Na+]o were relatively small. In this work, several potential mechanisms for SCD in CKD patients could be identified. The low HR for low [Ca2+]o is seen as a possible link to the observed bradycardia in CKD patients. The findings in this work could lead to a better surveillance of [Ca2+]o in hemodialysis patients, and therefore to a decrease in the SCD rate.
Cardiac excitation during atrial fibrillation (AFib) is changing dynamically, compromising the ability to identify underlying mechanisms by intracardiac catheter mapping. Statistical analysis of dominant excitation patterns may help to identify and subsequently eliminate the drivers of this tachycardia. As the morphology of local bipolar intracardiac electrograms (EGMs) depends on the orientation of the propagating excitation wave, its evaluation for a fixed multichannel catheter position can provide information about the stability of the depolarization pattern. Up to date, analysis of morphology is most often done by computing a similarity index or the recurrence rate of individual EGMs, reflecting how often similar excitations appear. We sougth to extend this approach to a classification based analysis technique. In each multichannel EGM, local activation waves (LAWs) were automatically detected by assessing instantaneous signal energy. A greedy algorithm was implemented to cluster LAWs based on their similiarity. New clusteres were formed when similarity fell below a predefined threshold. The concept was tested using simulated EGM data (quadratic patch of cardiac tissue, bidomain simulation, both planar and focal excitations, various catheter types). Results demonstrated that the algorithm correctly identified and classified the simulated excitation patterns. Subsequent quantitative analysis allowed to both discard singular classes of excitation and identify dominant excitations. The presented method forms the basis for statistical assessment of prevailing depolarization patterns, and for computation of additional features like conduction velocity, presence of focal sources, or dissociation when applied on multichannel data.
Chronic kidney disease appears worldwide. In the United States, the number of patients suffering from kid- ney failure doubled from 1998 to 2010. A common treat- ment for these patients is haemodialysis. However, the frequency of deaths caused by cardiovascular diseases is up to 10% to 30% higher in patients undergoing dialysis than in the general population. To analyse the underly- ing effects and for a possible risk prediction, a continuous monitoring of the ionic concentrations that are influenced by dialysis is desired. In this work, a method for the re- construction of the ionic concentrations of calcium and potassium from the ECG is proposed. In a first step, 91 monodomain simulations with the ten Tusscher ventricular cell model were performed for different extracellular ionic concentrations. From there, a standard 12-lead ECG was extracted. Calcium and potassium changes yielded ECGs clearly differing in amplitude and morphology. In a second step, the simulated ECG signals were used for reconstruc- ting the ionic concentrations directly from the ECG. Fea- tures were extracted from the signals designed to describe changes caused by varied ionic concentrations. The in- verse problem, i.e. coming back from the ECG features to the ionic concentrations was solved by regression with an artificial neural network. Results for potassium estimation yield an error of 0.00±0.28 mmol/l (mean±standard de- viation) calculated with 7-fold cross validation. The esti- mation error for calcium was 0.00±0.08 mmol/l. Although these results underline the suitability of the method, the used ECGs differed from the observed in a clinical envi- ronment. However, simulations allow an evaluation un- der controlled conditions of a particular effect that was intended to be investigated. As the application to clinical data is yet missing, this study can be seen as a proof of concept showing that an artificial neural network is capa- ble of exactly estimating potassium and calcium concen- trations from ECG features. 1. Introduction Haemodialysis therapy is a common treatment method for patients suffering from chronic kidney disease (CKD) in the terminal stage. The amount of people in the United States suffering from kidney failure increased from 320,000 in 1998 to 650,000 in 2010. The frequency of deaths caused by cardiovascular events within the dialysis patient group is up to 10% to 30% higher than in gene- ral population . Patients suffering from end-stage CKD experience high variations of blood electrolyte concentra- tions. These can directly influence the functioning of the heart. Thus, research on cardiovascular links could im- prove therapy and risk stratification. One tool which is capable of capturing the electrophysiological properties of the heart in a non-invasive way is the electrocardiogram (ECG). It is known, that electrolyte concentrations of po- tassium (K+) and calcium (Ca2+) affect the ECG . Un- til now, a determination of the concentrations is connec- ted to a blood test. Hence, continuous monitoring of the ionic concentration is impracticable. However, the ECG as a continuous, non-invasive monitoring tool could shed a light on the relation between heart diseases and changes in the ionic concentration particularly after leaving the strictly supervised clinical area where dialysis takes place, i.e allowing a monitoring at home. Articles have been pub- lished showing that the reconstruction of extracellular K+ concentration can be done using just one feature from the ECG with a quadratic regression . In this study, we tried to estimate both K+ and Ca2+ concentrations from the ECG. Therefore, we examined simulated ECGs at dif- ferent concentration levels and designed features descri- bing the observed changes in the ECG. A subset of these was used in connection with a machine learning method to reconstruct the concentrations. 2. Methods 2.1. Simulations A total number of 91 computer simulations of the car- diac electrophysiology were performed at whole heart
S. Schuler, L. Baron, A. Loewe, and O. Dössel. Developing and coupling a lumped element model of the closed loop human vascular system to a model of cardiac mechanics. In BMTMedPhys 2017, vol. 62(S1) , pp. S69, 2017
Modelling the interaction of the heart and the vascular system allows to study the pumping efficiency of the heart in a controlled environment under various cardiac and vascular conditions such as arrhythmias, dyssynchronies, regions of stiffened myocardium, valvular stenoses or decreased vascular compliances. To pose realistic hemodynamic boundary conditions to a four-chambered elastomechanical heart model, we developed a lumped element model of the closed loop human vascular system. Systemic and pulmonary circulations were each represented by a three-element Windkessel model emptying into a venous compliance. Both circulations were coupled by connecting the venous compliances to the corresponding atrium via venous resistances. Cardiac valves were represented by ideal diodes and resistances. Strong coupling between the heart and the vascular system model was accomplished by estimating the cardiac pressures that lead to continuous flows across the model interfaces. Active regulatory mechanisms were not considered. Pressures, flows and volumes throughout the circulatory system were simulated until a steady state was reached and the effects of model parameters on these hemodynamic parameters were evaluated in a sensitivity analysis. Increasing the systemic peripheral resistance by 50% caused an 8% decrease in stroke volume (SV) and a 33% increase in mean arterial pressure. Increased venous resistance descreased the E/A wave ratio of the atrioventricular flow and led to a reduced SV by impeding passive cardiac filling. Increasing the arterial compliance decreased mean cardiac pressures, while only slightly reducing the SV. Larger arterial resistances mainly caused higher peak systolic pressures. Furthermore, we show that embedding the heart model into surrounding elastic tissue by forcing permanent contact at the pericardial surface leads to more realistic time courses of atrial volumes and atrial pressure-volume curves composed of an A and a V loop as found in measurements. In conclusion, this work enables simulations of diseases that involve significant cardiovascular interaction.
G. Seemann, A. Loewe, and E. M. Wülfers. Effects of Fibroblasts Coupling on the Electrophysiology of Cardiomyocytes from Different Regions of the Human Atrium: A Simulation Study. In Computing in Cardiology, vol. 44, 2017
Atrial fibrillation is a common cardiac arrhythmia. The disturbance of the normal repolarization process due to heterogeneous myocyte-fibroblast coupling might play a role for this disease. We investigate this interaction in the heterogeneous atrium using a computational approach. Human atrial myocyte computational models represent- ing 10 different regions of the atrium were each coupled to a human atrial fibroblast model and the impact of the myocyte-fibroblast coupling on action potential measures was investigated. Myocytes from the pulmonary vein are affected most by the coupling to fibroblasts. Action potential amplitude is reduced from 105 mV to 94 mV and the upstroke velocity changes from 192 V/s to 152 V/s, potentially reducing the conduction velocity. In general, the action potential dura- tion of myocytes with short action potentials is prolonged and that of those with long is shortened. The large effect on pulmonary vein action potentials is mainly due to reduced IK1 in these cells compared to other regions of the atrium. The strong effects of fibroblast cou- pling to pulmonary vein myocytes are likely to be an addi- tional reason for the crucial role of the pulmonary veins in atrial fibrillation.
G. Seemann, A. Loewe, and E. M. Wülfers. Computational Study on Regional Differences in Pro-Arrhythmic Effects of Fibroblasts Coupling to Human Atrial Myocytes. In TRM Forum, 2017
Acquiring adequate mapping data in patients with atrial fibrillation is still one of the main obstacles in the treatment of this atrial arrhythmia. Due to the lack of catheters with both a panoramic field of view and sufficient electrode density for simultaneous mapping, electrophysiologists are forced to fall back on sequential mapping techniques. But, because activation patterns change rapidly during atrial fibrillation, they cannot be mapped sequentially. We propose that mapping tissue properties which are time independent, in contrast, allows a sequential approach. Here, we use the shortest measured electrogram cycle length to estimate the effective refractory period of the underlying tissue in a simulation study. Atrial fibrillation was simulated in a spherical model of the left atrium comprised of regions with varied refractory period. We found that the minimal measured electrogram cycle length correlates with the effective refractory period of the underlying tissue if the regions with distinct refractory properties are large enough and if the absolute difference in effective refractory periods is sufficient. This approach is capable of identifying regions of lowered effective refractory period without the need for cardioversion. Those regions are likely to harbor drivers of atrial fibrillation, which emphasizes the necessity of their localization.
Atrial fibrillation (AF) is the most common type of arrhythmia encountered in clinical practice but its maintaining mechanisms remain elusive. Over the last years, various theories have been proposed to target AF mechanisms. Recently, there has been an increasing interest in understanding how spiral waves and rotors sustain AF and how they might be therapeutic targets for catheter-based ablation. Phase mapping has recently been used as a robust method to characterize the spatiotemporal variability of electrical activities. In this study, we propose an independent approach for basket catheter electrogram (EGM) processing to detect rotors in AF. An improved version of the sinusoidal recomposition method for the local activation timings (LATs) has been developed and 3D phase maps have been reconstructed. An algorithm able to detect stable and meandering rotors on the left atrium (LA) surface was then developed. This workflow has been validated on synthetic EGMs and in silico showing excellent results. On in vivo data, we found 4.0±3.4 and 4.6±5.0 localized and meandering rotors with a persistence in time: 303.2 ±58.2ms and 302.3±52.0ms respectively.
E. M. Wülfers, A. Loewe, and G. Seemann. A Computational Study on the Electrophysiological Effects of Fibroblasts Coupling to Human Atrial Myocytes from Different Regions. In Cardiac Physiome Project, 2017